UTAH XHD LSP
Low SAPS UHPD-HC-Synthetic Heavy Duty Diesel Engine Oil
Customs number: 27101981
Catalog page DV/MO/NKW/-
Description
UTAH XHD LSP is an HC synthetic high- performance engine oil that meets the highly complex tribological
requirements of the EURO 5 and EURO 6 commercial vehicle engine generation in an excellent way.
This engine oil was developed for exhaust aftertreatment systems (particle filters).
UTAH XHD LSP is designed for use in heavily loaded commercial vehicle diesel engines under all operating conditions.
As an UHPD oil, it achieves maximum oil change intervals (up to 100.000 km- depending on the
manufacturer´s instructions) and can be used for all trucks, construction machinery, buses,
agricultural vehicles, etc.
Properties
- Low Saps (Low Ash) technology
- Highest wear protection
- Exceptional ageing and oxidation stability
- Reduces formation of ageing products at high temperatures
- Low volatilization tendency
- Excellent viscosity-temperature behaviour
- Excellent lubrication in range of highest temperatures
- Good elastomer compatibility.
Effects
- Especially for the latest EURO 5 and EURO 6 engine generation
- Improved economy viability by extended inspections-intervals (up to 100.000 km)
- Fuel efficiency by lightrun properties
- Minimum wear at highly strained engines
- All-year operation
- Protection against reflector surface formation
- Guarantee for absolutely clean motors and particle separators.
Suitable for/ we recommend this product for
SAE | 10W-40 | |
API | CK-4 | |
ACEA | E6/E7/E9 | |
We recommend this product for: | |
CATERPILLAR | ECF-3 | |
CUMMINS | CES 20086 | |
DAF | | |
DETROIT DIESEL | DDC 93K222 | |
DEUTZ | DQC IV-18 LA | |
JASO | DH2 | |
MACK | EOS 4.5 | |
MAN | M 3477, M 3271-1 | |
MB | 228.51 | |
MB | 226.9 | |
MTU | Typ 3.1 | |
RENAULT TRUCK | RXD, RGD | |
RENAULT VI | RLD-3 | |
SCANIA | Low Ash | |
VOLVO | VDS 4.5, CNG | |
Utilization
- Commercial vehicle diesel engines
- with multivalve technology
- with turbo charging
- with catalyst technology
- with particulate filter
Disposal
- UTAH XHD LSP is assigned to category 2 of used oils and thus is free for disposal.
Miscibility
- UTAH XHD LSP is miscible with comparable lubrications. It is recommended to take only UTAH XHD LSP when refilling
Typical values
Typical characteristics: | |
| |
Specific weight at 15°C | kg/m³ | 857 | |
Dynamic viscosity at -25°C | mPa.s | 4680 | |
Viscosity at 40°C | mm²/s | 97 | |
Viscosity at 100°C | mm²/s | 14,8 | |
Viscosity index | | 160 | |
Flash point COC | °C | 234 | |
Pourpoint | °C | -36 | |
TBN | mgKOH/g | 11 | |
Sulphate ashes | % | 0,95 | |
Phosphorus content | mass. % | 0,08 | |
Sulphur content | mass. % | 0,28 | |
Articles
Article No.:
1209 955
Packaging unit:
Can, 20 Liter
|
|
Article No.:
1209 956
Packaging unit:
Drum, 60 Liter
|
|
Article No.:
1209 958
Packaging unit:
Drum, 200 Liter
|
|
Article No.:
1249 959
Packaging unit:
PE-Container, 1000 Liter
|
|
|
|
Product datasheet
|
Logged in as
Guest
(login)
Notice
Our lubricants as well as our cleaning and maintenance products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers.
For further information please contact the following department: Motor Oils & Lubricants.
| |