Antifreeze ANF 40
Radiator protection concentrate Colour: green
Customs number: 38200000
Catalog page KC/WI/-/-
Description
Antifreeze ANF 40 is a full concentrate radiator protection based on Monoethylene glycol for operation in summer and winter, with frost and rust protection effect (all-year operation).
Antifreeze ANF 40, the high-performance corrosion antifreeze protection for motors and cooling systems meets the modern demands of the development in motor construction.
Antifreeze ANF 40 is free of nitrites, amines and phosphates.
Properties
- Protection against corrosion for all parts of the cooling system made of the materials steel, gray iron, aluminium, copper, brass, soft solder.
- Avoidance of cavitation damages, such as on the collant pump
- Compatibility with varnishes
- Compatibility with hose and sealing materials
- Avoidance of sediments, which can cause radiator plugging
- Avoidance of foaming
Application
Antifreeze ANF 40 is because of its specially used additives excellently suitable for aluminium, light alloy and gray iron motors (please observe manufacturer´s service instructions).
Recommended working concentration 50 % Antifreeze ANF 40 and 50% water, by which a radiatior protection up to -38 °C can be achieved. Antifreeze protection down to -69°C is possible with a maximum of 68% Antifreeze ANF 40 and 32% water.
Depending on the type and the manufacturer´s instructions the contents of the cooling system shall be replaced every 2 to 3 years.
Suitable for/ we recommend this product for
We recommend this product for: | |
AFNOR | NF-R 15-601 Type 1 | |
AS | 2108 | |
ASTM | D 3306, D 4985 | |
BS | 6580 | |
CUNA | NC 956-16 | |
JIS | K 2234 | |
ÖNORM | V 5123 | |
SAE | J 1034 | |
UNE | 26-361 | |
Miscibility
- Antifreeze ANF 40 can be mixed with the most of the coolants based on ethylene glycol.
To achieve an optimal corrosion protection and to avoid sludge formation it is recommended to use pure Antifreeze ANF 40. For the preparation of mixtures softened water should be preferred.
Typical values
Typical characteristics: | |
| |
Specific weight at 20°C | kg/m³ | 1.110 - 1.140 | |
Flash point COC | °C | >120 | |
Boiling point | °C | 165 | |
pH-value | (33 Vol.%) | 7,5-8,5 | |
Water content | % | <5 | |
Foam behaviour | corresponds | |
Pour point antifreeze/water=1:1 °C | -38 | |
Colour | green | |
Articles
Article No.:
510172
Packaging unit:
Can, 1 Liter
|
|
Article No.:
510173
Packaging unit:
Can, 1500 Milliliter
|
|
Article No.:
510174
Packaging unit:
Can, 5 Liter
|
|
Article No.:
510175
Packaging unit:
Pail, 20 Liter
|
|
Article No.:
510176
Packaging unit:
Drum, 60 Liter
|
|
Article No.:
510178
Packaging unit:
Drum, 200 Liter
|
|
Article No.:
510179
Packaging unit:
PE-Container, 1000 Liter
|
|
|
|
Product datasheet
|
Logged in as
Guest
(login)
Notice
Our lubricants as well as our cleaning and maintenance products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers.
For further information please contact the following department: Motor Oils & Lubricants.
| |