OAT- Coolant Concentrate with Molydate (Colour: orange / red)
Customs no.: 38200000
Description
Polarfreeze XVC 2 is a modern OAT coolant concentrate based on monoethylene glycol. The best possible cavitation protection is achieved through the OAT corrosion protection technology and a molybdate additive. Polarfreeze XVC 2 is recommended for use as a cooling and heat transfer fluid in passenger cars and heavy commercial vehicles. Polarfreeze XVC 2 is free of silicate, 2‑ethylhexanoic acid, borate, nitrite and phosphate.
Properties
Effective corrosion protection thanks to the addition of molybdate
High flux tolerance
Optimal heat transfer
Good oxidation and pH stability at high temperatures
Long‑term corrosion protection
Suitable for/ we recommend this product for
ASTM D3306
ASTM D6210
CHINA GB 27943.1‑2022
JIS K 2234:2018
UNE 26‑361‑88
We recommend this product for
CASE NEW HOLLAND
MAT 3624
CATERPILLAR
GCM34
CLAAS
DAF
DEUTZ
DQC CB‑14
DTFR 29C110 (MB 325.3)
PERKINS
RENAULT TRUCKS
VCS‑2
VOLVO BUS
VCS‑2
VOLVO CONSTRUCTIONS
VCS‑2
VOLVO PENTA
VCS‑2
VOLVO TRUCKS
VCS‑2
Use
Polarfreeze XVC 2 was developed for use in passenger cars and heavy commercial vehicles.
Can be used in hybrid vehicles and battery‑powered electric vehicles provided there are no requirements for electrical conductivity.
Polarfreeze XVC 2 must not be used undiluted. The permissible concentration range is above 33 vol.% and below 60 vol.%.
The maintenance instructions of the respective OEM must be observed.
Can be used in hybrid vehicles and battery‑powered electric vehicles provided there are no requirements for electrical conductivity.
Miscibility
For optimum corrosion protection, the unmixed use of recommended. Softened water should preferably be used to prepare mixtures. Optimum effect is only guaranteed if the entire cooling system is drained, rinsed and completely filled with is filled in a mixing ratio of 1:1.
